12.7 C
New York

India’s solar module manufacturing capacity could hit 110 GW by 2026 – pv magazine International


India may turn out to be the second largest photo voltaic producer on this planet by 2026. It additionally has a singular presence in all upstream segments of PV manufacturing, corresponding to cells, ingots/wafers, and polysilicon, in keeping with a bag – that report.

From pv journal India

India is about to succeed in 110 GW of photo voltaic PV module capability by fiscal 2026, with 72 GW of recent manufacturing capability coming on-line over the following three years. The numerous leap will construct self-sufficiency and make the nation the second largest PV producer after China, in keeping with a brand new report of the Institute for Vitality Economics and Monetary Evaluation (IEEFA) and JMK Analysis.

The report states that India has a major presence in all upstream segments of PV manufacturing. It claims cell capability will attain 59 GW by fiscal 2026, ingot/wafer capability will hit 56 GW, and polysilicon will contact 38 GW.

“The longer term is vivid for India’s PV manufacturing sector,” stated report co-author Vibhuti Garg, South Asia director for IEEFA. “The favorable coverage atmosphere created by the Indian authorities helps the PV manufacturing business develop quickly, which is mirrored in frequent bulletins of expansions or new investments within the sector.”

The report exhibits that India’s nameplate module manufacturing capability will greater than double from 18 GW in March 2022 to 38 GW in March 2023.

“The production-linked incentive (PLI) scheme is among the predominant catalysts that encourage the expansion of your complete PV manufacturing ecosystem in India,” stated Jyoti Gulia, the founding father of JMK Analysis. “Along with growing the infrastructure in any respect levels of PV manufacturing, from polysilicon to modules, it should additionally result in the simultaneous improvement of a marketplace for PV parts, corresponding to glass, ethylene vinyl acetate (EVA), and backsheets.”

The outcomes of the 2 tranches of the PLI scheme point out that there will likely be a rise of 51.6 GW in module capability and not less than 27.4 GW in built-in “polysilicon-to-module” capability in India within the subsequent three to 4 years.

Whereas the PLI scheme is a supply-side measure, the federal government has additionally taken steps to extend demand for domestically made photo voltaic modules. One such step is the introduction of indoor protection necessities (DCR) for solar energy in a number of authorities schemes, together with the Pradhan Mantri Kisan Urja Suraksha Evam Utthaan Mahabhiyan (PM-KUSUM) Scheme and the Central Public Sector Enterprise (CPSU) Scheme.

One of many necessary steps taken by the federal government to extend the demand for home PV modules is the introduction of the Permitted Checklist of Module Producers (ALMM) in 2019. The report states that even after making use of the upper fundamental customs obligation (BCD) of imported modules, the fee differential in comparison with home modules is small.

“In such a scenario, ALMM acts as an ideal commerce barrier that protects the pursuits of home producers. Thus, final 12 months, ALMM was crucial driver for the event of home PV manufacturing, ”stated Prabhakar Sharma, a advisor at JMK Analysis. “The most recent ALMM checklist, up to date on February 27, 2023 by the Ministry of New and Renewable Vitality, consists of 70+ home producers with an enlisted capability of twenty-two,389 MW.”

The report additionally identifies limitations which are holding again the home PV manufacturing business. Chief amongst them is the over-reliance on Chinese language imports for the upstream components of PV modules, corresponding to polysilicon, ingots, and wafers.

This content material is protected by copyright and might not be reused. If you wish to cooperate with us and need to reuse a few of our content material, please contact: [email protected].

Source link

Related articles


Recent articles