12.7 C
New York

Imec unveils 781 cm2 bifacial perovskite solar panel with 11.9% efficiency – pv magazine International


Scientists in Belgium have developed perovskite photo voltaic panels with a thermally steady gadget stack. The encapsulated bifacial panels they produced with this configuration have been capable of retain round 92% of their preliminary effectivity after 1,000 hours.

A analysis workforce led by Imec, a Belgian analysis institute, has produced a perovskite photo voltaic module based mostly on a scalable gadget stack.

“We report the event of a strong gadget structure that may be processed by industry-compatible strategies, comparable to sputtering, evaporation, and slot-die coating,” mentioned researcher Anurag Krishna. . pv journal.

The panel relies on 17%-efficient perovskite photo voltaic cells constructed with a pin configuration, an electron transport layer fabricated from nickel(II) oxide (NiOx), a perovskite layer deposited by slot-die coating, an electron transport layer fabricated from buckminsterfullerene (C60) and lithium fluoride (LiF), a bathocuproine (BCP) buffer layer, and a copper (Cu ) electrode.

The scientists constructed a 56-cell monofacial panel with an energetic space of 784 cm2, an influence conversion effectivity 13.08%, and a geometrical fill issue (GFF) which is about 89%. They then constructed a second bifacial module by changing the Cu electrode with one based mostly on indium tin oxide (ITO).

“Beneath thermal and lightweight stress, electrode metals comparable to Cu, Au, Ag, and so forth. are identified to diffuse into the perovskite layer. and thus compromise the long-term stability, whereas the gadgets with clear conductive electrodes confirmed higher stability underneath accelerated getting old,” they defined. “ITO has a decrease conductivity in comparison with steel electrodes, which may result in resistive losses and thus a decrease fill issue. To scale back that, we created a module design with a decreased subcell width that results in 93 subcells.

The bifacial panel has an aperture space of 781 cm2 and capable of obtain an influence conversion effectivity of 11.9%.

“Moreover, the encapsulated bifacial mini-modules (4 cm2) developed present excessive tolerance to IEC 61215-based damp warmth [85 C, 85% relative humidity (RH)]the very best stay round 92% of preliminary effectivity after 1,000 hours,” says Krishna, noting that IInterfacial passivation can additional improve gadget effectivity.

The researchers say the outcomes present that the proposed gadget stack is thermally steady, and that encapsulation sturdy sufficient to make sure stability.

Lecturers offered the module on “Secure Gadget Structure With Industrially Scalable Processes for Realizing Environment friendly 784 cm2 Monolithic Perovskite Photo voltaic Modules,” which was lately revealed in IEEE Journal of Photovoltaics.

“This work is a crucial milestone within the improvement of up-scalable manufacturing applied sciences for perovskite photovoltaics,” mentioned Krishna.

This content material is protected by copyright and might not be reused. If you wish to cooperate with us and wish to reuse a few of our content material, please contact: [email protected].

Source link

Related articles


Recent articles