12.7 C
New York

Swiss manufacturer enters Australia with heterojunction solar module – pv magazine International


Swiss photo voltaic module producer Meyer Burger is coming into Australia’s rising PV market by providing a variety of high-performance photo voltaic panels that it claims present larger vitality yields than conventional applied sciences. .

From pv journal Australia

Meyer Burger plans to enter Australia’s rising photo voltaic market with heterojunction half-cell photo voltaic panels, which supply as much as 20% extra yield in comparison with typical PERC modules. It says it would provide White, Black and Glass modules in Australia. All of them have heterojunction half-cell photo voltaic cells. It says that the modules obtain an effectivity of as much as 21.8% and have as much as 400 W output.

The White panel measures 1767 x 1041 x 35 mm and weighs 19.7 kg. It’s accessible in wattages from 380 to 400 W and efficiencies between 20.7% and 21.7%. Its temperature coefficient is -0.23% per diploma Celsius and the utmost system voltage is 1,000 V. It’s made with 120 monocrystalline heterojunction half-cells and three.2mm antireflective glass.

The Black product has the identical weight and dimensions because the white module, in addition to its parts and energy efficiency knowledge. It’s accessible in 5 variations with energy rankings between 375 and 395 W and effectivity from 20.4% to 21.5%.

As for the glass-glass model, the module weighs 24.4 kg and measures 1722 x 1041 x 35 mm, its energy ranking is between 370 and 390 W, effectivity as much as 21.8%, and essentially the most most system voltage is 1,500 V.

White and Black merchandise have a 25-year linear energy output guarantee and a 25-year product guarantee. Their common annual deterioration is 0.25% for 25 years and a couple of% within the first 12 months of their lifetime. The output guarantee for the glass-glass panel is 30 years and not less than 93% of the preliminary efficiency is assured.

Meyer Burger Australia/New Zealand Nation Supervisor Brendan Kay stated Australia supplied important progress alternatives for the producer.

“The Australian photo voltaic market, with its excessive demand for sustainable merchandise produced to excessive social and moral requirements, provides a wonderful alternative for Meyer Burger,” he stated. “With our photo voltaic panels, the client can harvest a variety of photo voltaic vitality from the roof – even at very excessive temperatures. This benefit is even larger than the glass product, which, if put in appropriately, will -converts the solar to electrical energy even on the again facet with a bifacial effectivity of greater than 90%.

The Australian arm of Germany’s BayWa re will function the preliminary distributor of Meyer Burger panels in Australia.

BayWa Australia Managing Director Durmus Yildiz stated he anticipated the Swiss-designed and German-made panels to “fill an necessary hole within the Australian market… decreasing the carbon footprint of high-performance its modules.”

This content material is protected by copyright and might not be reused. If you wish to cooperate with us and wish to reuse a few of our content material, please contact: [email protected].

Source link

Related articles


Recent articles