26.7 C
New York

Solar mounting structure made of end-of-life wind turbines – pv magazine International

Published:


Swiss startup Turn2Sun has developed a PV mounting construction with end-of-life wind turbine blades. It positioned the construction at an altitude of two,500 meters within the Grisons area of Switzerland, with 16 bifacial 430 W photo voltaic modules.

Swiss startup Turn2Sun Renewables, a subsidiary of engineering consulting group Planair, has developed a PV mounting construction product of end-of-life wind generators. The “Blade2Sun” answer makes use of reused blades to assist a steel construction that helps bifacial PV modules, which doesn’t require an ordinary mounting construction with a metallic beam.

“The variety of modules that may be mounted on a blade is determined by numerous parameters, such because the size of the blade, the lateral reinforcement, and the native climate circumstances, particularly wind and snow ,” stated Noé Tallon, undertaking chief for Planair. pv journal.

The corporate put in a prototype at a 2,500-meter altitude web site within the Grisons area of Switzerland. It options 9 bifacial 430 W photo voltaic modules on one blade and one other seven panels on the opposite blade, in three rows in a panorama place.

“There aren’t any lateral reinforcements, as a result of the pilot makes use of solely commonplace PV-mounting rails which can be commercially accessible,” Tallon stated. “Subsequent iterations of the prototype will use reinforcements to succeed in a wider size and due to this fact improve the variety of parallel modules on a blade.”

The wind turbine blades of the pilot set up are 8.4 meters lengthy and weigh 420 kg every. They’re positioned on a 5-meter excessive assist construction. Tallon stated Turn2Sun goals to put in photo voltaic mounting constructions as shut as potential to repowered wind parks, to cut back transportation prices and the general carbon footprint.

“The principle benefit of this answer is using used wind turbine blades with a uncooked price that’s negligible and even adverse, which makes it extra aggressive in comparison with constructions that heavy steel that’s typically used for prime PV installations and makes for a major a part of the worldwide price,” stated Tallon.

The corporate says it’s growing partnerships with a number of world gamers to supply the Blade2Sun answer in international locations exterior of Switzerland. Purposes reportedly embody carparks, water reservoirs, agrivoltaics installations, and roadside arrays.

High view of the prototype throughout meeting

Picture: Turn2Sun

This content material is protected by copyright and is probably not reused. If you wish to cooperate with us and need to reuse a few of our content material, please contact: [email protected].



Source link

Related articles

spot_img

Recent articles

spot_img